Thanks to the advanced re-refining technology and further improvement of the hydrogenation process, Itelyum Regeneration has created a new range of HG Gruppo II+ products, a step towards the future needs of its customers. WHY USE ITELYUM REGENERATION HG GROUP II+?
- More severe engine tests and new “manufacturers” specifications require a Hg Group II+ base oil
- A mix of Viscolube Hg Group II + base oils may perform better than a mix of Group I/ III base oils
- More than 75% of engine oil demand can be met using Hg Group II + bases
- More than 95% of industry oil demand can be met using Hg Group II + bases
- Perfect with Low/Mid SAPS additives
- They reduce formulation complexity
- They allow cost-formula savings
|
Method |
Unit |
Limit |
HG-3N |
Colour |
ASTM D 1500 |
– |
max |
L 0,5 |
Flash Point C.O.C |
ASTM D 92 |
°C |
min |
170 |
Kinematic Viscosity |
ASTM D 445 |
mm2/s |
typical value |
15,5 |
Viscosity index |
ASTM D 2270 |
– |
min |
100 |
Pour Point |
ASTM D 97 |
°C |
max |
-6 |
Noack |
CEC L-40-A-93 |
% mass |
max |
35 |
Sulphur |
ASTM D 5453 |
% mass |
max |
0,03 |
Saturates |
ASTM D 2007 |
% mass |
min |
90 |
|
Method |
Unit |
Limit |
HG-4N |
Colour |
ASTM D 1500 |
– |
max |
L 0,5 |
Flash Point C.O.C |
ASTM D 92 |
°C |
min |
190 |
Kinematic Viscosity |
ASTM D 445 |
mm2/s |
typical value |
22,5 |
Viscosity index |
ASTM D 2270 |
– |
min |
105 |
Pour Point |
ASTM D 97 |
°C |
max |
-9 |
CCS viscosity |
ASTM D 5293 |
cP |
max |
|
-25 °C |
|
|
|
1300 |
Noack |
CEC L-40-A-93 |
% mass |
max |
22 |
Sulphur |
ASTM D 5453 |
% mass |
max |
0,03 |
Saturates |
ASTM D 2007 |
% mass |
min |
90 |
|
Method |
Unit |
Limit |
HG-5N |
Colour |
ASTM D 1500 |
– |
max |
L 0,5 |
Flash Point C.O.C |
ASTM D 92 |
°C |
min |
215 |
Kinematic Viscosity |
ASTM D 445 |
mm2/s |
valore tipico |
30,0 |
Viscosity index |
ASTM D 2270 |
– |
min |
110 |
Pour Point |
ASTM D 97 |
°C |
max |
-9 |
CCS viscosity |
ASTM D 5293 |
cP |
max |
|
-25 °C |
|
|
|
2700 |
-20 °C |
|
|
1500 |
1850 |
Noack |
CEC L-40-A-93 |
% mass |
max |
12 |
Sulphur |
ASTM D 5453 |
% mass |
max |
0,03 |
Saturates |
ASTM D 2007 |
% mass |
min |
90 |
ENVIRONMENTAL LABELS Itelyum Regeneration regenerated bases possess the REMADE in ITALY ® certification, the first certification mark for products and materials deriving from recycling and reuse. The label describes the characteristics of environmental sustainability of the material, process, and product, in terms of raw materials and energy saving and the reduction of CO2 emissions. REMADE in ITALY ® was created to promote a more sustainable Italian industry, in partnership with the Ministry of the Environment.